View Full Version : Tree 2UVR parts

10-03-2010, 11:24 PM
Does anyone know of a current source for tree (2UVR) parts? I have scoured this and the other two channels and am coming up empty handed. Apparently, 3S is no longer in business.

I am presently needing the main drive belt (stamped Reeves FS-2031), but will probably be needing other parts in the future.

Any help is appreciated.


10-04-2010, 11:35 AM
I'm having trouble matching up belt #'s. My belt is torn about 3/4 of the way across, but didn't break completely so it's still on the machine (60 miles away at present). I planned on having a new belt in hand prior to disassembling (and if anyone has any hints/tricks on this, they would be much appreciated), but would be able to get a replacement today if I were able to cross reference the number.

When looking with a flashlight into the housing, I could see "Reeves FS-2031" stamped on the belt.

In the Tree Manual, the belt is Part # M-1619 - "MS 7419 FS 20317 Reeves Belt"

Can anyone provide another manufacturer's part # (cross reference) for the main drive belt for a Tree 2UVR?



10-08-2010, 12:40 AM
If you can't cross the belts locally the Tree brand is now owned by Eagle Machine. They may be able to help
www.treemachinecnc.com (http://www.treemachinecnc.com)
www.eaglemachinetool.com (http://www.eaglemachinetool.com)

Just took a look at the site and they mention belts for the manual machine on the front page...