PDA

View Full Version : BP spindle speed control



zcases
06-15-2005, 09:52 AM
Didn't really see a better forum for this question......hope this is the right place.

I am looking for specifics on controlling spindle speed with a Mach/gecko retrofit on both a Bridgeport V2XT and also a Boss5. Can anyone help with this?

Thanks
Scott

ger21
06-15-2005, 10:06 AM
Do you need a 0-10V signal for a VFD? http://www.campbelldesigns.com makes a Mach2 compatible board for this.