PDA

View Full Version : Need help with a 4860



Dannyrotorpilot
09-07-2010, 09:03 AM
Hey there friends,

I just purchased a Shopsabre 4860 that is about 4 years old. Does anyone have an assembly manual for this model I can take a look at? Any help would be greatly appreciated!

whipper
09-24-2010, 09:10 AM
I have the manual you are talking about, still need it? can email or ship a copy if you want.

ro7all
01-29-2011, 03:04 PM
sell while you can!

CNCUSER51
02-17-2011, 06:13 PM
You should have bought a new one.. ShopSabre is a good brand but if I remember correctly they come fully assembled... why is it disassembled?

whipper
02-17-2011, 06:59 PM
You are mistaken, There is some assembly, the gantry needs to be placed. The used machines can be great too.

CNCUSER51
05-25-2011, 10:03 AM
You are mistaken, There is some assembly, the gantry needs to be placed. The used machines can be great too.

I called around and I found that there should be no assembly required... ShopSabre ships fully assembled with no Gantry installation neeeded unless you requested it shipped disassembled.

Just wanted to give you a heads up.

whipper
08-01-2011, 05:15 AM
Do you have a Shop Sabre from four years ago? read the manual? or just an online source of good will? The guy is asking for help and you can't wait to tell him that he is screwed.

CNCUSER51
08-17-2011, 05:29 PM
Call ShopSabre.. I am sure the will help

I am not trying to tell anyone they are screwed. Maybe I dont know what I thought I did but I am sure they wont tell you your screwed.