PDA

View Full Version : Encoder Belt



Brainfarth
08-31-2010, 01:10 PM
I'm having trouble finding the belt that connects the drive gear to the encoder on a MG gantry for our plasma. The part number on the belt is : DFABT-144-MA9
I'm located pretty close to Portland Oregon. So if anyone knows where I can get this from locally, that would be great.

Thanks

-Mike

Al_The_Man
08-31-2010, 02:29 PM
You should be able to measure the spec's, width, pitch, length etc and look up a sub.
Probably standard Dimensions.
Al.