PDA

View Full Version : DMG DMU70 - Heidenhain, manual handwheels!



waynbridge
07-27-2010, 12:39 PM
Is there a way to put servo motors where the handwheels are, and configure it in the machine so that when it reads the position where it needs to be, it unclamps the table and drives it to the postition??? Winding by hand is so tedious. Would be easy to mount servo drives but configuring it in...... now the guy that can do that is the guy i really want to talk to! :-)))))). Tried ringing OEM... no luck.

Much thanks to who knows and can help

Wayne