PDA

View Full Version : Newbie correction on axis moving



vagelism22678
07-10-2010, 11:27 AM
Hello to all!I have just setup my cnc machine. Is an Axminster x2 convetred cnc machine.The machine works great...and all axis are respond nice and smooth.So my question is pretty simple I think.What are the options that I have to change in the turbocnc program in order to correspond correct in GCODE.For example when I say go 1 inch left on X it will go 1 inch and not 1,1.

Thank you for your time and advices.