PDA

View Full Version : KL-1500 spindle, overstock in Chicago, on sale



automationtechinc
06-20-2010, 06:34 PM
We have 50pcs KL-1500 spindle, overstock in Chicago office, on sale

KL-1500 Milling Spindle
Special sale $249
Specification:
OD=80 MM
Voltage: 220V
Speed: 6000-24000 R/min
Power: 1500 (2HP)W, Frequency:400 Hz
Water Cooling, ER11 collet chuck
Grease Lubrication, NSK Bearing
Water cooling about 20-26 gal/hr
one year USA warrenty

http://www.kelinginc.net/CNCSpindleandController.html

awerby
06-21-2010, 03:30 PM
One would need a Variable Frequency Drive to run any of those spindles, but it's unclear if the VFD is included, or is extra. If it's extra, how much does it cost? Does the VFD come with a manual in English, or just Chinese?

Andrew Werby
www.computersculpture.com

automationtechinc
06-22-2010, 12:18 PM
One would need a Variable Frequency Drive to run any of those spindles, but it's unclear if the VFD is included, or is extra. If it's extra, how much does it cost? Does the VFD come with a manual in English, or just Chinese?

Andrew Werby
www.computersculpture.com

VFD is not included, you need to order in our website

If you want a spindle KL-1500 + VDF-15 kit: $428.95

http://www.kelinginc.net/CNCSpindleandController.html