PDA

View Full Version : need help wiring power supply



timewarp
06-20-2010, 06:08 PM
Hi, I have a keling power supply kl- 7212. I have the input into the transformer wired for 110v (2 reds joined together, 2 blacks joined together). The output from the transformer is 2 blue wires, then 2 green wires. Where do these go? I assume that 2 or more of them go to the ac input on the voltage converter to dc, but I do not know which. I have not found any help on the keling site.
Thanks, Paul

automationtechinc
06-20-2010, 06:29 PM
Hi, I have a keling power supply kl- 7212. I have the input into the transformer wired for 110v (2 reds joined together, 2 blacks joined together). The output from the transformer is 2 blue wires, then 2 green wires. Where do these go? I assume that 2 or more of them go to the ac input on the voltage converter to dc, but I do not know which. I have not found any help on the keling site.
Thanks, Paul

http://www.kelinginc.net/SwitchingPowerSupply.html

http://www.kelinginc.net/KL7212.pdf

2 reds joined together, 2 blacks joined together

timewarp
06-20-2010, 06:34 PM
Not what I need to know, but thanks. My question is where do the greens and blues go??

jalessi
06-20-2010, 08:20 PM
Timewarp,

See attached image for wire location.

Jeff...

timewarp
06-20-2010, 10:25 PM
Thanks Jeff, It looks like the 2 blues in 1 and the 2 greens in the other.
Paul