PDA

View Full Version : Mach3 Plasma



anthony
05-18-2005, 06:11 PM
I have Mach3 up and running. smooth sailing so far.

Mach3-Plasma, however, won't move my steppers. with the same settings, seems like signals are crossing (the wrong LEDs light up on my breakoutboard).
though it is reading Estop and limit conditions.

Mach3 with the plasma.set (and classic.set) works great.

what is the diff between Mach3-Plasma and Mach3 w/ Plasma screen?
-anthony

ger21
05-18-2005, 07:21 PM
You must have something set differently. Carefully go through all the setup screens and double check everything.