PDA

View Full Version : Need Help! Can't reach DynaCNC and need info



CbrViking
04-09-2010, 03:30 PM
I have a 24" x 36" table and I want to upgrade it. I has some backlash on one side of the long axis and I want to replace the lead nut but I don't know what the rod dimensions are. I'm away from my machine right now and would like to buy the components and have them waiting when I return.

Also, the Z axis is way too close to the table (Bad design). I'd like to buy some of the same extrusions they use for the base and just raise the axis by using that as sort of a shim. Anyone know where to get some of the extrusion?

bogger44
04-10-2010, 12:55 AM
Dyna cnc has gone under for some time. You can measure the lead screw and order parts from another company,

The good thing about dyna they used no propriety equip. so you can get parts anywhere.

The extrusions are 80/20 they can be bought from the company or bought on ebay.

CbrViking
04-10-2010, 11:53 AM
I saw the extrusions on EBay but didn't find the right one. I'll have to look again.