PDA

View Full Version : Need a source for WHITE VITON O'rings... quick delivery?



squale
03-03-2010, 08:49 PM
I am having a problem finding places that have quick delivery on WHITE VITON O'rings. The sizes range from anywhere from 10mm O.D. to 70mm O.D. and the cross section can be in the range of say 1mm to 4mm.

I know of a few places that I have used in the past but they are usually 5+ weeks out on delivery since white viton o'rings are considered special order.

can anybody help?

thanks

LTS
03-03-2010, 08:52 PM
Try DICHTOMATIK in Houston 713 675-7325
good luck

squale
03-04-2010, 10:24 AM
thanks I will give them a call, it's tough to find WHITE VITON..

mactec54
03-04-2010, 02:06 PM
squale

Red is the industry standard for Viton some have green but white would be special any were, you might find them from someone that has done over runs of a custom order I know you could get them in China but they most likely would take the same amount of time for delivery

http://www.applerubber.com/

http://www.rubberfab.com/

cygnus x-1
03-08-2010, 05:50 PM
McMaster also has it:

http://www.mcmaster.com/



C|