PDA

View Full Version : HEIDENHAIN -> TOUCH-PROBE



  1. Save several neutral points
  2. rotate processing layer over 3 points
  3. how do i send probed checking data to printer
  4. freely defined table
  5. approach 2 drill holes on cast part
  6. calibrate measuring probe
  7. work piece tilt + set zero point
  8. set zero point when processing small series
  9. measuring system
  10. calibrate TT130
  11. adjust work prices and probe zero point (C42U)
  12. identify 4 drill holes with Touch Probe 421
  13. measure the flatness of a flat surface