PDA

View Full Version : USB, RS232 , PARALLEL ETC



  1. PCI-Express Parallel Port Adaptor card - Will it work ?
  2. EMUFDD 4.0 - Floppy HW Emulator (+USB)
  3. Discuss everything USB, RS232 , PARALLEL ETC here!
  4. Upload via rs232 to machine tip
  5. Using TELNET Connection
  6. cnCam software drivers or better camera solution
  7. parallel port issues with mach 3
  8. C10 Breakout board with laptop
  9. cnc to pc but suddenly not the other way?
  10. HELP, Help, help....Parallel port Pin 11
  11. rs 232 connection between PC en NUM 760 controller
  12. Samsung Lathe to network
  13. RS232/RS485. Still a need?
  14. Parallel port voltage issues
  15. SCSI
  16. RS232 Problems
  17. Transfer of Programs from PC to Machine
  18. RS232 cables, adaptors and issues?
  19. DNC Error
  20. Parrellel and com port?
  21. DNC SOFTWARE FOR DRIPFEED
  22. Serial to USB
  23. Rs-232 from a Heidenhain display unit
  24. How do I save my programs from my Prototrak Plus?
  25. Having trouble outputting files through hyperterminal.
  26. Recommendations for PCI Parallel card?
  27. DB25 parallel port data direction
  28. problem RS232 On Intergrex 200sy
  29. RS232 Cable Tester
  30. Help for newbie: USB-Parallel DB25
  31. LPT woes...ugh
  32. Parallel USB
  33. Transfer programs from cnc to pc. Tree, Dynapath
  34. PC sending all parallel pins high when shutting down
  35. PC to CNC devices for older CNCs (RS232 <--> USB)
  36. arduino parallel port hack for Chinese 3040
  37. pci parallel port
  38. Parallel port card suggestion for Newbie
  39. Viper 850 RS232 port
  40. Polaris 2 lathe from 2002 test cable.
  41. Need some RS232 Help!
  42. RS232 Switch on a New Windows 7 System
  43. Anyone using pmdx usb hook ups
  44. Send program from controler back to pc with rs232
  45. CNC electronics parallel problem?
  46. USB BREAKOUT BOARD FOR MACH3
  47. C-tek km-150 232 connection
  48. help about cable shema pinout
  49. need help with enabling ecp for paraport
  50. Do you use Cimco DNC-Max or Editor to send to the machines
  51. Communication ports setting on LapTop with Windows8
  52. Problem Loading Program - Mori Seiki MV-JR 10M
  53. Storing date from NC9-F (Amada Brake Press) through RS232 port
  54. DB25 Parallel Connection to USB on Breakout board for CNC Router
  55. CNC USB Motion Control
  56. Can a Usb to Lpt port Cable work with a breakout board?
  57. Newbie question
  58. Yasnac 2000B DB25 parallel port to tape reader cable
  59. CNC USB DRIVER AND SOFTWARE TEST
  60. Where is Parallel Port?
  61. Liberty LPT pins
  62. Lab Volt 5600 serial/null modem cable
  63. Traub TX 8F DNC
  64. lpt1 can,t get to work
  65. Mori Seiki E77190A02 Operator Interface Panel Screen (MSG-501)
  66. Mori Seiki E77190A02 Operator Interface Panel Screen (MSG-501)
  67. Mori Seiki E77190A02 Operator Interface Panel Screen (MSG-501)
  68. CNC ROUTER PARRALLEL PORT
  69. rs232 cable connection problem
  70. Parallel Port issue - USB options?
  71. Need more inputs, Parallel Port. Ideas
  72. Connect Johnford TC-35 or Amada 30-50-72 with RS-232 to Windows 10 PC
  73. using linux ubuntu to dnc or upload files to fanuc 21i-TA
  74. LPT vs USB vs ETH what is better and why
  75. UC100 Issues
  76. Usb to db9
  77. Need Advice On Additional Serial Ports and Switch boxes
  78. Isel 4030 connection problem.
  79. Need help identifying pinout
  80. Has anyone ever tried using an rPi for DNC drip feeding?
  81. Serial communication cable parameters
  82. Hooking up new stepper control setup, need advice
  83. Need help hooking up CandCNC controller