PDA

View Full Version : Epoxy Granite



  1. Epoxy-Granite machine bases (was Polymer concrete frame?)
  2. Index to "Epoxy-Granite machine bases" thread
  3. Epoxy Granite In Practice (Mineral Casting, Polymer Concrete)
  4. Epoxy Granite "s Skeleton
  5. Design of a vibration table
  6. interesting zanite video of epoxy granite
  7. Completely Different
  8. attach machine to building
  9. So whats the Exopy Granite Mix?
  10. E/G for gear making ?
  11. Epoxy Bearing Material and Method
  12. Reinforced concrete damping for steel machine structures.
  13. Epoxy concrete CNC mill 500 X 500 X 320h work area concept drawings
  14. Epoxy Concrete Aggregate Ratio Mixing Method
  15. Which epoxy for dead flat surfaces? and hardness?
  16. Epoxy Concrete Commercially Made Machines only
  17. Durcon engineered stone/epoxy rein
  18. getting ready to cast - please check my rock selection
  19. E/G Sheet Metal Press?
  20. need link to a thread
  21. Make your own Timing Pulley from epoxy
  22. Proposed bed for 8'*4' cnc machine. Comments and thoughts?
  23. How to machine E/G
  24. Will sharp sand suffice for epoxy granite ?
  25. Epoxy metal?
  26. anvil
  27. Epoxy Concrete CNC mill 700x500x400 Design and Build
  28. Custom made precision mill with epoxy-granite base
  29. Threaded rod or standard inserts?
  30. Any book on epoxy-granite?
  31. Epoxy Concrete CNC V Mill 500x700x400H Designed in CAD and method
  32. Casting a part that can be drilled and tapped
  33. Adding carbon black to EG?
  34. My first E/G mill, the making of
  35. Kevlar tape?
  36. PU Polyurethane resin / Epoxy alternative
  37. Source for inexpensive self leveling epoxy for railways
  38. Inserts cast against Surface Plate?
  39. Fluids Engineer here! New to CNC but I believe I can help our EG efforts.
  40. A new epoxy granite CNC
  41. EpoxyGranite - small desktop CNC
  42. Epoxy granite (Mineral casting, Polymer concrete)---Particle size distribution
  43. Concrete Filling Open Columns
  44. CASTINITE EG CASTINGS
  45. Epoxy Granite Mill Head filling
  46. Headstock design
  47. Epoxy granite filled rails - how big to mill steel?
  48. Building an EG machine
  49. Epoxy Mortar or Grout CNC built
  50. Build Thread Just finished my CNC mill design in SolidWorks, construction should begin soon
  51. HardBlok or similar engine cement for filling mini mill column or base?
  52. simple test piece
  53. EG micro
  54. REAL granite? Tombstone slabs?
  55. Uba Tuba granite as machine base?
  56. Why is there so little going on in Epoxy Granite?
  57. How do you mix larger quantities of epoxy granite?
  58. Problem Bubbles in Mixture of Epoxy Resin
  59. Rustoleum Turbocrete
  60. Open Source CNC Build
  61. Best way to make Shell and Tube Heat Exchanger
  62. Need Help! epoxy granite for precision machine
  63. New Machine Build New Machine Build High Precision Fiber Laser Cutter
  64. Designing with EG
  65. Axis Alignment
  66. Need Help! 635 Thin Epoxy questions?
  67. Quartz Counter top for Mill Base
  68. Is western sytem Epoxy 105 good for casting E/G?
  69. Epoxy granite mill head support beam
  70. epoxy granite sliding on epoxy granite.
  71. Fiberglass chopped strands in the mixture ?
  72. New Machine Build First EG mill
  73. Advantages of epoxy vs cement concrete cnc?
  74. Filling tubular steel with EG. Pros and Cons?
  75. Newbie Wich are the best filler for Epoxy?
  76. Newbie Linear rails bolted to steel members with hard epoxy surface in between.
  77. Reusable HDPE mold
  78. Why no one has done an EG lathe so far?
  79. Composite quartz countertop base
  80. Advice needed on filling my mill with EG
  81. Epoxy granite CNC mill inspiration
  82. Newbie cheapest up to date epoxy granite milling machine (cnc conversion) project? for steel
  83. Building a EG or buying a milling machine
  84. Large EG Milling Machine Design
  85. Epoxy/Granite VMC Build - many questions - could help others with similar plans
  86. Suggestions for building an large CNC router out of Epoxy granite or UHPC concrete
  87. Epoxy granite or UHPFRC Concrete 5 axis CNC
  88. I need advice on this design. EG mill head with spindle.
  89. Newbie Epoxy-Granite and Aluminum T-Slots
  90. Mineral (geopolymer) Vs. Organic Polymer Expoxy For Granite Composite
  91. New Machine Build Bumblebee 300x300x150mm
  92. Epoxy granite in metal frame.
  93. New Machine Build CNC machine made out of granite
  94. Epoxy Granite / Quartz Granite Mixes & Tests