View Full Version : Metal Finishing / Plating

  1. Anodising
  2. Anodising tank
  3. Stripping chrome,nickel and copper
  4. Zinc Phoshate
  5. Gold Chrome?
  6. Surfaces shall be decorticated to H12
  7. hard chrome on aluminum?
  8. Powder Coating
  9. Metal Recovery Technology
  10. replating nickel
  11. Nickel Silicon-Carbide (Nikasil)
  12. Anodizing sandblasted aluminum?
  13. Salt Bath Threadment
  14. Aluminium chameleon/aurora/oil-treatment?
  15. Zinc Plating ???
  16. Bronze coating carbo steel
  17. Anodise hurt by baking?
  18. Problem MIL-C-13924 white powder?
  19. aluminum polishing tutorial
  20. Gluing aluminum
  21. Sanding Aluminum - with the grain?
  22. Anodising Power Supplies
  23. Need Help! 3M Scotchbrite - Belts?
  24. Steel Blacking
  25. Need Help! Anodizing parts weeks or months after machining
  26. WHO Does Black PVD?
  27. Regular & Black Chrome?
  28. Mirror finish steel and aluminum parts vibratory bowl?
  29. Is there any way to plate copper onto aluminium?
  30. Finishing/anodizing aluminum
  31. Patina
  32. Really need some help with engine cylinder bore - Nikasil plating
  33. Eroding of conecting wires
  34. finish type for aluminum parts subject to temperature cycling
  35. Triple Chrome Plating Kit
  36. Tungsten-Nickel Electroplating to Replace Chrome?
  37. Need Help! Painting engraved text
  38. powdercoating
  39. Looking for an anodizing company referral!
  40. Problem Diameter grows with black anodize?
  41. Brass plating
  42. bead blasting
  43. Rookie seeking help with pre-annodize finishes (bead-blasting vs. chemical etching)
  44. Electroless nickle plating on titanium
  45. Need for anodize/chem film?
  46. Coloring brass
  47. Coloring Gold or Platinum
  48. Good & Cheap Anodizer in Toronto?
  49. Aluminum Front Panel Lettering
  50. Silkscreen on Anodize/PC
  51. Grinding welds on exhaust tube
  52. Need Help! Zinc Cobalt with Olive Drab Passivation over Electroless Nickel
  53. Just got some parts back from the anodizer
  54. Need Help! Anodizer in the North East needed
  55. Anodizing question
  56. Need Help! Surface finish is too nice!
  57. Need Help! How to choose a company to do metal polishing?
  58. Need Help! Please suggest surface finishing process
  59. Trying to match this finish.
  60. New Metal Finishing Product Help!!
  61. Problem Base Plate
  62. Surface finish on journals
  63. Need Help! Using KoolMist Formual 77/78, easy to "wash" off?
  64. Need Help! Part longer than tank
  65. Need Help! A bendable coating!?
  66. Need Help! What anodizing method for matte finish?
  67. Need Help! Steam Clean prep before paint.
  68. newbie could use a little help anodizing..
  69. Need Help! Die cast plating
  70. Need Help! plating or coloring neodymium magnets
  71. Blackening Kit
  72. mirror finish on steel
  73. metal emblem
  74. Problem Black spotting on chromated 7075 al parts
  75. Need Help! Aluminum Spray Painting
  76. Need Help! Lasering Brass Plates
  77. Want rust finish on forging
  78. anodizing aluminium
  79. Need advice Setting Up production: 4 to 8 sq ft of 39" long 1x1" AL Angle daily use
  80. Applying silicone finish to one side of metal part
  81. Need Help! Need Help with basic copper plating
  82. Referral for Type III class I Anodize 6' long T-slot extrusion
  83. Need Help! Looking to get a Coke machine piece chromed
  84. Need Help! Nitriding general information/discution
  85. Aluminum 7075 surface finishing.
  86. Need Help! Anodizing and brass..
  87. Metal Calculator Android Program
  88. Problem Copper plating Fiberglass
  89. small batch heat treating
  90. Safe&cheap electroplating
  91. conductive non metal material for plating?
  92. Anodizing quality issue
  93. German language surface treatement callout?
  94. Need Help! Anodizing
  95. Please recommend a good anodizer company (anywhere in the USA)
  96. Problem Aluminum anodizing - what am I doing wrong?
  97. Need Help! Contamination under black light on aluminum anodized
  99. Coating for insert holders