- Need help om programming a keyhole
-
Member
Need help om programming a keyhole
We have Alphacam Essentials and I need to program a keyhole. The bit will plunge down then move 10mm sloping down 2.1 mm. Then continue moving another 10mm and return to the plunge site at that depth then retract. How do I draw it?
Similar Threads:
-
-
Member
Re: Need help om programming a keyhole
Search on keyhole in vcarve. Since the software can’t handle the Z slope I would manually change the g-code. Lower Z at top of the U shape.
Test in air to make sure it works.
Sent from my iPhone using Tapatalk
- Need help om programming a keyhole
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules