Need help om programming a keyhole

[newood]

We have Alphacam Essentials and I need to program a keyhole. The bit will plunge down then move 10mm sloping down 2.1 mm. Then continue moving another 10mm and return to the plunge site at that depth then retract. How do I draw it?

Similar Threads:

• Keyhole g code question
• Xilog 3 Parametric Programming Offline Programming
• instruction parameter programming / macro programming
• Need Help!- Keyhole cutting with mazatrol m32
• Google buys Keyhole.com. Download free trial and "fly" to your flying field or track

[Dean448]

Search on keyhole in vcarve. Since the software can’t handle the Z slope I would manually change the g-code. Lower Z at top of the U shape.
Test in air to make sure it works.


Sent from my iPhone using Tapatalk