Need Help! Manual Tool Paths Help


Results 1 to 1 of 1

Thread: Manual Tool Paths Help

  1. #1
    Member The_Wright_One's Avatar
    Join Date
    Jul 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Manual Tool Paths Help

    Thank you for letting me in to this group. I am a new user to alphacam and I am having problems with a couple of things. the first thing is with the manual tool paths part of programming. I have recently started with a door manufacturer and I am modifying old parts by moving some geometry around and then reposting the program. but the manual tool path I can not get to work like the original part, or I can't figure out how the tool path was created. the next problem I am having is after modifying a part and then reposting it. i send it to the machine and the work offset is in the wrong spot. I did not change the position of the origin. so everything should have been ok with the part and program. is this a bug that I have to worry about in the future?


    thank you for all of your help

    Similar Threads:
    Attached Files Attached Files


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Manual Tool Paths Help

Manual Tool Paths Help