Julien, hello!
Where is the picture or project?
Hi everybody,
.
I'm triying to machine a complex shapes, for a wallpanel drawn with rhino-grasshopper
I want to machine the closed triangle and keeping straight corner inside... I dont know which strategy i need to use in alphacam.
I want machine with VBIT 90°, but i can't machine with this tool and advanced 5 axis strategy. I try machining along polyline, whith corner inside as curve to follow (in black on the picture), it works but i can't give angle to my tool to machine the dependant face at the same time.
Thanks in advance.
Julien.
Similar Threads:
Julien, hello!
Where is the picture or project?
Hello 31010, can't you see any picture on my post?? There is two...
Anyway i have add files as attachment, 2 pictures and zipped alphacam file.
Thanks.
Take a 120 degree cutter. And do 3d engraving
https://www.cnczone.com/forums/attac...1&d=1605452751
It is for all who work on BIESSE machine ROVER with CNi controllers RT480/RT481!
http://www.rt480.3dn.ru
I have attached the file in a previous post.
Do you have a 5-axis machine?
What is the diameter of your cutter?
It is for all who work on BIESSE machine ROVER with CNi controllers RT480/RT481!
http://www.rt480.3dn.ru
Oh sorry, i haven't seen attached file... But i can't open "incorrect file version" i'm on 2020 version
Yes i have a 5 axis CNC (centateq homag) et my post-processor can manage 5 axis toolpath...
Thanks.
It is for all who work on BIESSE machine ROVER with CNi controllers RT480/RT481!
http://www.rt480.3dn.ru
Thanks i can open this file...
Last edited by ZU31010; 11-15-2020 at 01:39 PM.
It is for all who work on BIESSE machine ROVER with CNi controllers RT480/RT481!
http://www.rt480.3dn.ru
Hi can't access the video...Maybe not shared with me...
yes it looks perfect, is the piece machined with 90 cutter??
Yes, a 90 degree cutter. But this is an equilateral triangle. And the angle of inclination of the surface is taken known. Therefore, in this case, you can process the polyline with the calculated tool inclination angle.
It is for all who work on BIESSE machine ROVER with CNi controllers RT480/RT481!
http://www.rt480.3dn.ru
You're a boss Man !!!! Thanks taking time to solve my problem It's possible send me the new .ard file ? after that i think i can work on this by myself... Did you use machine along spline or polyline stategy ??
All the best.
Julien.
It is for all who work on BIESSE machine ROVER with CNi controllers RT480/RT481!
http://www.rt480.3dn.ru
Thanks, but the same as previous "incorrect file version" is it 2021 file??
It is for all who work on BIESSE machine ROVER with CNi controllers RT480/RT481!
http://www.rt480.3dn.ru