rotary alphacam problem


Results 1 to 1 of 1

Thread: rotary alphacam problem

  1. #1

    Default rotary alphacam problem

    i am using alphacam for a cnc rotary axis when i do the simulation all is fine but the G-code is wrong the Y axis is not @ the center & the Z axis also
    I donno if the problem is from the mchine configuration or from the post processor.
    does anyone can help me to fix this problem.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Dec 2010
    Location
    Russia
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: rotary alphacam problem

    What kind of machine? Which pivot axis? What post processor are you using?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

rotary alphacam problem

rotary alphacam problem