Alphacam Sinumerik 828D post processor

[robbiediesel]

Hi everyone, we are trying to source an Alphacam post processor to work with our 2017 Romi 2 axis cnc lathe with siemens sinumerik 828d controls. Any suggestions where to start looking? Or should we change to a more readily available cam software?
Many thanks in advance.

Similar Threads:

• New Machine Build- new Mastercam Certified Siemens Post for 3x Milling SINUMERIK 840D Sl & 828D
• to Add 4th Axis capability to my EXISTING and WORKING post processor (siemens 828D )
• Need Help!- Need help to add 4th Axis to my working post processor for siemens 828D control
• Need Help!- Need post processor option file for Siemens 828D Basic M in powermill

[Maroslav4]

Not necesary change CAM for this application. It is easy drive control. Which problem you have in a postprocessing?

[robbiediesel]

Hi Maroslav4, many thanks for your reply.The Alphacam turning program we are running only has about 5x post processors with it, a couple of alphacam standard ones, a fanuc one and a couole of others, none of them seem to work. We are using Alphacam on our Haas VF mill without issues but did have to source a Haas post processor for that.

Not necesary change CAM for this application. It is easy drive control. Which problem you have in a postprocessing?