alphacam sloping

[basswakr]

i am using alphacam advanced router

the part is 1" thick uhmw
it has a 3" pocket & has a down slope on 1 end
inside the pocket so i have to mill going down the slope


i know how to slope going across the slope
but can't go that direction

if u need more info i will be glad to send it.

thx mike

Similar Threads:

• Sloping or Profiled cut shape
• Alphacam sloping help
• Laser cutting Delrin, getting sloping edges
• Need Help!- Sloping table on 3040t
• Sloping bores

[Fribe]

If you create a work plane on the slope then you can just use a pocket operation choosing the direction of the cut