- alphacam sloping
-
Member
alphacam sloping
i am using alphacam advanced router
the part is 1" thick uhmw
it has a 3" pocket & has a down slope on 1 end
inside the pocket so i have to mill going down the slope
i know how to slope going across the slope
but can't go that direction
if u need more info i will be glad to send it.
thx mike
Similar Threads:
-
-
Member
Re: alphacam sloping
If you create a work plane on the slope then you can just use a pocket operation choosing the direction of the cut
- alphacam sloping
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules