can alphacam take into account the tool holder when calculating the toolpath?


Results 1 to 2 of 2

Thread: can alphacam take into account the tool holder when calculating the toolpath?

  1. #1
    Registered
    Join Date
    Aug 2016
    Posts
    6
    Downloads
    0
    Uploads
    0

    Post can alphacam take into account the tool holder when calculating the toolpath?

    hello.
    i have been working with alphacam for 7 years now.
    i use it for stone carving mainly, recently i have been working on a big column capital and the tools doesn't reach as deep as they should to finish the roughing , so i added extensions but when doing the simulation it shows that the holder crashes into the stone.

    any ideas?

    thank you.



  2. #2
    Member Maroslav4's Avatar
    Join Date
    Apr 2015
    Location
    Czech Republic
    Posts
    295
    Downloads
    7
    Uploads
    0

    Default Re: can alphacam take into account the tool holder when calculating the toolpath?

    Quote Originally Posted by Aburmaiz View Post
    hello.
    i have been working with alphacam for 7 years now.
    i use it for stone carving mainly, recently i have been working on a big column capital and the tools doesn't reach as deep as they should to finish the roughing , so i added extensions but when doing the simulation it shows that the holder crashes into the stone.

    any ideas?

    thank you.
    Hi,

    hard to say without a video or attached file.
    Try upload your alphacam file.

    Postprocessors, VBA macros, .NET programming.
    www.cadcam-softcz.cz


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

can alphacam take into account the tool holder when calculating the toolpath?

can alphacam take into account the tool holder when calculating the toolpath?

can alphacam take into account the tool holder when calculating the toolpath?