Alphacam and Pade uni 5


Results 1 to 2 of 2

Thread: Alphacam and Pade uni 5

  1. #1
    moertn's Avatar
    Join Date
    Jan 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Unhappy Alphacam and Pade uni 5

    Hello guys!

    I got some questions about Pade, cause i don´t know what to do!
    I´m working with Alphacam and sometimes, when i generate easy operations like circles, the machine is doing something else, than i was generating in Alphacam. Is this a Post processor error, or what happens in the machine?
    Yesterday the machine is showing some errors and the only way to get them out was a restart.
    When i´m working with 3 Axis every measuring is fine but when i start to mill a workpiece from side with the head of the tool, the measuring is every time -1mm than i wanted.
    Is there a possibility to change some parameters to adjust the axis?
    when i plane a surface the high of Z is exact too.



    Best Regards
    moertn



  2. #2
    Member Maroslav4's Avatar
    Join Date
    Apr 2015
    Location
    Czech Republic
    Posts
    327
    Downloads
    7
    Uploads
    0

    Default Re: Alphacam and Pade uni 5

    Can you please upload there a problematic NC code and Alphacam project?

    Postprocessors, VBA macros, .NET programming.
    www.ccsoftcz.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Alphacam and Pade uni 5

Alphacam and Pade uni 5