Best way to engrave / pocket this text?


Results 1 to 4 of 4

Thread: Best way to engrave / pocket this text?

  1. #1
    Member Padidaddy's Avatar
    Join Date
    Feb 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Best way to engrave / pocket this text?

    Hello all, I'm trying to pocket this text 2mm deep into veneered ply. Most letters a fine but those with smaller inner geometry are not. i cant seem to stop the tool path from ignoring the inner geometry curves. how do i do this?. I have stainless inner's that will fit into the pocketed text.
    Any help appreciated.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Best way to engrave / pocket this text?-stepriser-jpg  


  2. #2
    Member
    Join Date
    May 2011
    Location
    Denmark
    Posts
    105
    Downloads
    0
    Uploads
    0

    Default Re: Best way to engrave / pocket this text?

    It's impossible to see anything from a Picture - upload the .ard/amd file



  3. #3
    Member
    Join Date
    Aug 2014
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: Best way to engrave / pocket this text?

    I'd be tempted to just use a standard pocket and select all the geos... Make sure your ghost tools are on the outside for the inner geos.



  4. #4
    Member
    Join Date
    Aug 2014
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: Best way to engrave / pocket this text?

    I'd be tempted to just use a standard pocket and select all the geos... Make sure your ghost tools are on the outside for the inner geos.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Best way to engrave / pocket this text?

Best way to engrave / pocket this text?