If you ask specific questions, you might get some answers.
Sounds like what you may need is some training classes?
Need help. First time using Alphacam to program this type of machine. Have been using Alphacam for the last 2yrs to program our stone CNC's. This type of application is foreign to me. Any help is appreciated.
If you ask specific questions, you might get some answers.
Sounds like what you may need is some training classes?
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Hello
I am looking for a 5 axis post processor (alphacam) to run a helios cnc machine for stone i just found 1 post processor with the alphcam that i have & it need a lot of editing to match the G code for this machine
any help is appreciated.