Pos Processing for Biesse Rover A-S 1332


Results 1 to 6 of 6

Thread: Pos Processing for Biesse Rover A-S 1332

  1. #1
    RoverAs1332's Avatar
    Join Date
    Feb 2018
    Location
    99999
    Posts
    3
    Downloads
    0
    Uploads
    0

    Question Pos Processing for Biesse Rover A-S 1332

    Hello,
    I have the following problem, we had the machine installed with the alphacam + post processor of the Biesse Rover AS 1332, as this machine had problems, there was the formatting and in the new installation we could not get it to save the files with the post processing to bise, below follows the video link made to try to explain what I need Alphacam to do again.

    https://www.dropbox.com/s/nwboon2eoy...00.03.mp4?dl=0

    In the second 30 shows the pre-processing I need to open that is not opening.

    Note: I have all the files from the old installation.

    I thank you already for trying to help me.



  2. #2
    Member
    Join Date
    May 2011
    Location
    Denmark
    Posts
    108
    Downloads
    0
    Uploads
    0

    Default Re: Pos Processing for Biesse Rover A-S 1332

    Hi, why don't contact Your reseller?



  3. #3
    RoverAs1332's Avatar
    Join Date
    Feb 2018
    Location
    99999
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    but I got in touch, they informed me that they will check, but that may have been something done by third parties.

    Since they did not give me answers I'm still looking for alternatives because I need to solve this as soon as possible.

    But I appreciate the help from everyone.



  4. #4
    Banned
    Join Date
    May 2015
    Location
    USA
    Posts
    60
    Downloads
    0
    Uploads
    0

    Default Re: Pos Processing for Biesse Rover A-S 1332

    save contacting the reseller tof last,,,they only sell you stuff,,,,,contact the post writer first,,,,,,,,,that code looks fine,,,,can u send me a copy of the code,,,,it maybe just saving the file with .cix extension,,,try opening code in workd pad and saving as xxxx.cix



  5. #5
    Banned
    Join Date
    May 2015
    Location
    USA
    Posts
    60
    Downloads
    0
    Uploads
    0

    Default Re: Pos Processing for Biesse Rover A-S 1332

    keysoftwareservice.com



  6. #6
    Member Maroslav4's Avatar
    Join Date
    Apr 2015
    Location
    Czech Republic
    Posts
    327
    Downloads
    7
    Uploads
    0

    Default Re: Pos Processing for Biesse Rover A-S 1332

    Hi,

    which problem you have on a machine? Some error?

    Postprocessors, VBA macros, .NET programming.
    www.ccsoftcz.com


  7. #7
    RoverAs1332's Avatar
    Join Date
    Feb 2018
    Location
    99999
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Hello, today we are working normally, because I found an IMG of the OS of the machine with alphacam intact, with that I was able to create a virtual machine and make the personnel access remotely.

    As I gained this time, talking to the support they gave me the contact of a third party who could help me, now it is in his hands.

    But I will separate a folder with all the files that I think are related to this post processing and I will post it to you along with a file with the code it generates, to see if you can help me.


    But I appreciate the help from everyone.



  8. #8
    Registered
    Join Date
    Nov 2017
    Location
    Bosnia And Herzegovina
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Pos Processing for Biesse Rover A-S 1332

    Hi,
    Does anyone have a postprocessor for Biesse Rover A, for Alphacam or SolidCam



  9. #9
    Member Maroslav4's Avatar
    Join Date
    Apr 2015
    Location
    Czech Republic
    Posts
    327
    Downloads
    7
    Uploads
    0

    Default Re: Pos Processing for Biesse Rover A-S 1332

    Quote Originally Posted by vojobozovic View Post
    Hi,
    Does anyone have a postprocessor for Biesse Rover A, for Alphacam or SolidCam
    For Alphacam yes, Solid Cam no.

    Postprocessors, VBA macros, .NET programming.
    www.ccsoftcz.com


  10. #10
    Registered
    Join Date
    Nov 2017
    Location
    Bosnia And Herzegovina
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Pos Processing for Biesse Rover A-S 1332

    thanks for the quick answer, how can I get a postprocessor for Alphacam



  11. #11
    Registered
    Join Date
    Nov 2017
    Location
    Bosnia And Herzegovina
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Maroslav4 View Post
    For Alphacam yes, Solid Cam no.
    How can I get post for Alphacam



  12. #12
    Raja_TEVTA's Avatar
    Join Date
    Oct 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Please help me to fix my machine AS-1325
    1. AXs 339: Axis is not Calibrated
    2. NC in emergency



  13. #13
    russ1962's Avatar
    Join Date
    Mar 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Hello,
    I have Alphacam 2015 and a Biesse klever 1530g ft.
    I need a post for the alphacam.
    Can anyone help.

    Thanks



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Pos Processing for Biesse Rover A-S 1332

Pos Processing for Biesse Rover A-S 1332