Anchors vs Carriage bolts


Results 1 to 2 of 2

Thread: Anchors vs Carriage bolts

  1. #1
    Registered
    Join Date
    Jan 2018
    Location
    United States
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Anchors vs Carriage bolts

    I am crossing one 8020 3060 over the top of an 8020 3030 at 90 degrees. Is it stronger to use carriage bolts and U bolt plates or counterbores with anchors?

    bgasser
    Kansas City

    Similar Threads:


  2. #2
    Registered Art_HeatSign's Avatar
    Join Date
    Jun 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Anchors vs Carriage bolts

    Hey there
    Based on your 90 degrees arrangement, Counter bores with anchors is a better option.
    They are stronger than carriage bolts, Counter bores give room for such arrangement.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Anchors vs Carriage bolts

Anchors vs Carriage bolts