Problem Backup of the machine parameters.


Results 1 to 6 of 6

Thread: Backup of the machine parameters.

  1. #1
    Registered blasterpl's Avatar
    Join Date
    Nov 2014
    Location
    Poland
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Backup of the machine parameters.

    How to perform a backup of the machine parameters. My machine is a Mori Seiki SL-3B ( Fanuc 5T) with BTR.

    Similar Threads:


  2. #2
    Registered
    Join Date
    May 2014
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default Re: Backup of the machine parameters.

    I just write mine down on paper , make a few copies and store in different places including the control itself.
    My BTR doesnt allow me to send programs back to the pc so im sure i would be able to send the parameters back either .
    There arnt allot of them anyway so not a major problem just to jot them down.
    Not sure if there is another way .
    My 6t"s i do the same thing .



  3. #3
    Registered blasterpl's Avatar
    Join Date
    Nov 2014
    Location
    Poland
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Backup of the machine parameters.

    The simplest ways are the best . That too not previously thought about it.



  4. #4
    Registered blasterpl's Avatar
    Join Date
    Nov 2014
    Location
    Poland
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Backup of the machine parameters.

    These are my machine parameters Mori Seiki -SL-3B Fanuc 5T. It may be useful to someone .

    Backup of the machine parameters.-00-25-jpg Backup of the machine parameters.-26-52-jpg

    Backup of the machine parameters.-53-79-jpg Backup of the machine parameters.-80-99-jpg

    Last edited by blasterpl; 12-25-2014 at 09:08 AM.


  5. #5
    Gold Member fordav11's Avatar
    Join Date
    Aug 2011
    Location
    Fordaville
    Posts
    2517
    Downloads
    0
    Uploads
    0

    Default Re: Backup of the machine parameters.

    Quote Originally Posted by Shottie_gp View Post
    I just write mine down on paper , make a few copies and store in different places including the control itself.
    My BTR doesnt allow me to send programs back to the pc so im sure i would be able to send the parameters back either .
    There arnt allot of them anyway so not a major problem just to jot them down.
    Not sure if there is another way .
    My 6t"s i do the same thing .
    On the 6 series you can punch the parameters....
    select EDIT
    press PARAM button
    type P-9999 then press PUNCH

    it may also work on 5-series. Just try it.



  6. #6
    Registered
    Join Date
    May 2014
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default Re: Backup of the machine parameters.

    Quote Originally Posted by fordav11 View Post
    On the 6 series you can punch the parameters....
    select EDIT
    press PARAM button
    type P-9999 then press PUNCH

    it may also work on 5-series. Just try it.

    Thanks Fordav I will certainly give it a bash .
    Just got another 2 lathes with 6t controls(1x6ta and 1x6tb) and need to get the parameters copied and saved .
    This could save me a bunch of time .
    Thanks



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Backup of the machine parameters.

Backup of the machine parameters.