hey guys - im wondering how i can do this


Results 1 to 5 of 5

Thread: hey guys - im wondering how i can do this

  1. #1
    Registered
    Join Date
    Mar 2016
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default hey guys - im wondering how i can do this

    hey all. was asked to make this for a customor/
    i have knowlege in rhino and grasshopper. anyone has any idea of how to get into that?
    thanks!

    Similar Threads:


  2. #2
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    34524
    Downloads
    0
    Uploads
    0

    Default Re: hey guys - im wondering how i can do this

    Buy it from the people that manufacturer it and add 25% to the price for your customer.

    Someone wants you to make it because they don't want to pay what it costs.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Registered
    Join Date
    Mar 2016
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: hey guys - im wondering how i can do this

    Quote Originally Posted by ger21 View Post
    Buy it from the people that manufacturer it and add 25% to the price for your customer.

    Someone wants you to make it because they don't want to pay what it costs.
    well, i like to know how i can get along by myself. ive made somthing simular:



    but in what i did was alot of angles, in what ive seen the structure is simullar , but in what he showed me there is something looks like paper and im not sure how i can do this.

    anyone got a clue?

    btw, what ia mde was made with rhino+grasshopper

    Attached Thumbnails Attached Thumbnails hey guys  -  im wondering how i can do this-7cb34c86-10e0-4144-87b4-64daf4daec6a-jpg  


  4. #4
    Member
    Join Date
    Apr 2004
    Location
    Oakland CA USA
    Posts
    4836
    Downloads
    0
    Uploads
    0

    Default Re: hey guys - im wondering how i can do this

    You can use Rhino's Heightfield function on that gray-scale photo to get a low relief and then carve it on a CNC router. But if you can just buy these panels, that would probably be easier and cheaper, and wouldn't violate anyone's Intellectual Property rights.

    Andrew Werby
    https://computersculpture.com/


  5. #5
    Registered
    Join Date
    Mar 2018
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: hey guys - im wondering how i can do this

    Hi!
    Could you tell me how you solved the issue? I'd make it with NURBS, if I had 3D scan data, or with T-Splines, if there was no need to replicate the surface precisely. Rhino could help in the both cases (at the moment I have no examples, but I'll add them over time) or some other T-Spline software like . If you did it without scanning, it should have taken a lot of time)



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

hey guys  -  im wondering how i can do this

hey guys  -  im wondering how i can do this

hey guys  -  im wondering how i can do this