Need more CONTROL Flashforge with Replicator Not enough!


Results 1 to 8 of 8

Thread: Need more CONTROL Flashforge with Replicator Not enough!

  1. #1
    Member nelZ's Avatar
    Join Date
    Jun 2008
    Location
    US
    Posts
    262
    Downloads
    0
    Uploads
    0

    Default Need more CONTROL Flashforge with Replicator Not enough!

    Hi,

    I'm a nubie to this. I've been running my printer from the SD card for a few months. I finally got the Replicator to connect to the printer. I was expecting to be able to control the bed temperature and print speed with my mouse and computer but I can't find it.

    Do I need another program to do this? I actually can't find any way (printer or computer) to control the bed temp......and that's important I think !

    Thanks,
    Nelson

    Similar Threads:
    i build the braces that keep american teeth straight......tick tick tick


  2. #2
    Registered
    Join Date
    Sep 2013
    Location
    USA
    Posts
    147
    Downloads
    0
    Uploads
    0

    Default Re: Need more CONTROL Flashforge with Replicator Not enough!

    The easiest way to control the bed temp using rep is by modifying the Gcode before sending it to your printer. Also it's best to print from a sd card as it is more reliable.



  3. #3
    Registered
    Join Date
    Sep 2013
    Location
    USA
    Posts
    147
    Downloads
    0
    Uploads
    0

    Default Re: Need more CONTROL Flashforge with Replicator Not enough!

    Makerbot desktop is another option it a lot of people recommend it for dualtrusion.



  4. #4
    Member nelZ's Avatar
    Join Date
    Jun 2008
    Location
    US
    Posts
    262
    Downloads
    0
    Uploads
    0

    Default Re: Need more CONTROL Flashforge with Replicator Not enough!

    Hey thanks!

    I don't know if you are familiar with Replicator, but when you go to make the Gcode you get a box inquiring about temps, raft, supports, which of the dual extruders to use, but nothing about bed temp. Sure I could change the code but I'm in streamline mode now....trying to make this quicker. I'll scope out Makerbot to see what it's got.

    i build the braces that keep american teeth straight......tick tick tick


  5. #5
    Registered
    Join Date
    Sep 2013
    Location
    USA
    Posts
    147
    Downloads
    0
    Uploads
    0

    Default Re: Need more CONTROL Flashforge with Replicator Not enough!

    I only use replicator for updating the firmware now. You can change the code but I don't remember how off hand. If you use the quick setting box I think the changes need to be done in the startup script. I can look at it some more in the next day or 2 if you don't get it figured out before.



  6. #6
    Member nelZ's Avatar
    Join Date
    Jun 2008
    Location
    US
    Posts
    262
    Downloads
    0
    Uploads
    0

    Default Re: Need more CONTROL Flashforge with Replicator Not enough!

    Startup script??? Thanks, I'll look for it. They shoulda put it in that Gcode parameter dialog box

    i build the braces that keep american teeth straight......tick tick tick


  7. #7
    Registered
    Join Date
    Sep 2013
    Location
    USA
    Posts
    147
    Downloads
    0
    Uploads
    0

    Default Re: Need more CONTROL Flashforge with Replicator Not enough!

    I finally had time to check on this. What machine are you running? What version of replicator G?



  8. #8
    Registered
    Join Date
    Sep 2013
    Location
    USA
    Posts
    147
    Downloads
    0
    Uploads
    0

    Default Re: Need more CONTROL Flashforge with Replicator Not enough!

    For example using repg sailfish and a creator x. Goto c:\programfiles (x86)\replicatorg salifish\replicatorg-0040-sailfish\machines\replicator\dual_head_start.gcode . Search for m109 then set the s value after that to your desired hotbed temp. Should look something like this (m109 s110) t0 (set hbp temperature)- that would give you a hotbed temp of 110°



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need more CONTROL    Flashforge with Replicator    Not enough!

Need more CONTROL    Flashforge with Replicator    Not enough!