Welcome to the CNCzone.com-The Largest Machinist Community on the net! forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
|
 CNCzone.com-The Largest Machinist Community on the net! |
|
|
|
|
>
|
>>
|
|
Xylotec Xylotex XS4430U/16S-4
|
|
|
|
Reviews
|
Views
|
Date of last review
|
|
3
|
19862
|
|
|
 |
|
Recommended By
|
Average Price
|
Average Rating
|
|
67% of reviewers
|
None indicated
|
None indicated
|
|
|
|
|
|
|
|
Description:
|
4 Axis Unipolar Drive (uses 5, 6 or 8-wire motors)
Upto 44VDC, and 3A/Phase (34VDC /- recommend, which is the ouput of a 24VAC rectified/filtered tranformer based supply)
1/16th, 1/8th, 1/4, and 1/2 step modes set with jumpers
Onboard RC filtering with HCT541 line buffering for STEP and DIR lines
All unused I/O ported to Screw terminals. 10K pullup on inputs (if resistor installed)
ENA# (enable) jumper input for each axis (also on molex header for easy use with an ENA switch)
DB25M connector for direct attachement to PC Parallel Port Extension Cable
On board DC-DC converter for logic power AND can be used for 100mA 5V fan (fan not supplied with kit)
Motor current set by potentiomenters
On-board reset circuitry
Heavy 2.5 oz. copper circuit board.
Perfect for HF Mill/Drill retorfits, and many Homebrew projects
|
|
Keywords:
|
stepper boards
|
|
|
|
|
Author
|
|
HarryAB2PN
Registered: August 2004
Location: USA
Posts: 2
|
|
Review Date:
|
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 10
|
|
Pros:
|
Inexpensive, easy to assemble and setup.
|
|
Cons:
|
None
|
|
Inexpensive, Easy to assemble, Easy to setup, Works as Advertised.
|
|
|
|
Jonny Spear
Registered: March 2007
Location: USA
Posts: 1
|
|
Review Date:
|
Would you recommend the product? Yes |
Price you paid?: None indicated
| Rating: 10
|
|
Pros:
|
easy, educational, simple, reliable
|
|
Cons:
|
none
|
|
I agree. This was my first CNC purchase. I bought the complete package, which had a power supply incorporated into a box with the boards, and the cabled stepper motors.
One possible suggestion for improvement, is to make the motor cables a couple of feet longer. That way, the computer and electronics could more easily be moved farther away.
|
|
|
|
|
Islam
Registered: June 2009
Location: Egypt
Posts: 1
|
|
Review Date:
|
Would you recommend the product? No |
Price you paid?: None indicated
| Rating: 0
|
|
What about the cost of this complete package ?
|
|
|
|
|
|
Powered by: ReviewPost PHP vB3 Enhanced
Copyright 2006 All Enthusiast, Inc.
All times are GMT -5. The time now is 07:52 AM.
;)
;)
