Is Yeager Automation still around?

[corrie]

Thanks for the feedback gents. I decided to have the hard drive partitioned. I,ll dedicate ten gig to widoze 98 and the rest to xppro. Iwasnt to keen on doing it myself so I sent it out. Thanks for the advice once agian and cheers.

[John3]

Originally Posted by corrie Thanks for the feedback gents. I decided to have the hard drive partitioned. I,ll dedicate ten gig to widoze 98 and the rest to xppro. Iwasnt to keen on doing it myself so I sent it out. Thanks for the advice once agian and cheers.

Corrie,

I may have missed something, but if you are planning on a DOS partition to run the controller, DOS can only go to 2.1g partition sizes. I'm not sure if windoz 98 qualifies as real DOS, even if you don't start the GUI?

Can someone with more knowledge about what CNCpro needs / likes, please comment?

John

[ger21]

You can boot Win98 into plain DOS. Just hit F8 while it's booting to get to a menu that let's you choose DOS.