1. Here's a zoomed out view of my machine.
2. This is a close-up of the 30mm Thomson rails. Very rigid.
3. The 8080 base provides extra strength for the table top.
4. 2510 ballscrew up close.
5. 1610 ballscrew up close.
6. Side profile of the uprights.
7. Straight as an arrow.
8. Spindle, inverter, and motors.
9. Teknomotor face-plate.
10. AC Tech face-plate.
11. Cable chain.
12. XZERO power supply cover.
13. Power supply inside.
14. An old Toro water irrigation box for electronics housing.