XZero CNC

[gio666]

30x72

[gio666]

[gio666]

[gio666]

[gio666]

[mactec54]

gio666

How many RPM can your 270oz steppers do, they seem to be moving your router gantry really well

[gio666]

[gio666]

Igus cable chain , 25x25 push in wires , also have Igus cable chain wires , very flexible

[ihavenofish]

gio666

How many RPM can your 270oz steppers do, they seem to be moving your router gantry really well

600ipm on a 10mm pitch screw is 1500rpm or so. thats what mine does safely with no stalling.

[gio666]

On the square rail machine , you can put 2 super heavy bearings on X axis ,

[gio666]

Double nut on Y , is so smooth with double nuts

[buckeyes1997]

Glad to see your new thread going off with a BANG. Nice pictures. Makes me drool just looking at them. Dig up some of those pictures of the Hiwin full machine and show them off. It really is a good design.

George I just finished mouting my drives/controller in the cabinet. I'm ready for the machine now..hahaha.



Matt