xylotex/ sherline speeds and settings

[bfreedland]

what kind of speeds and settings are people getting with the 269inoz xylotex set and a sherline mill.

[Oldmanandhistoy]

Hi,

I have done a quick search in the “bench top mill” forum and came up with a couple of possible sources for the information you are looking for. If these are no good try searching the bench top mill forum for more or post a question on one of the threads I linked to; they will very likely be happy to help.

http://www.cnczone.com/forums/showth...lotex+sherline

http://www.cnczone.com/forums/showth...lotex+sherline


John

[bfreedland]

neither thread has any info about velocity, acceleration and general rapid transit speeds. I already have a sherline working with a xylotex setup. I am curious as to how fast others have gotten their kits to run a sherline before losing steps. again any first hand experience as to how fast, and what they are setting mach 2/3 to get those speeds.
-b