LinkBack URL
About LinkBacks
awhile ago I made one using google sketchup when I was designing my box. I will look for it but it is in skp.
Edit: Found it, here is a picture. Let me know if you would like it.
| | |
CAD Drawing Of XYLOTEX 3 Axis Drive? Anybody have CAD (DXF, DWG, IGES, STEP, STL, SLPT, 3DM, etc) file(s) of the Xylotex 3 axis boards? I'm not looking for high detail, just want to layout a box/container for a couple of drives and power supplies. Yeah I could do it but would save me some time if you've done it already and are willing to share.
Even the single axis would be close enuf! I've got HayTays wiring diagram of 3 singles - but looking for 3D.
Thanks in advance and, as alwaysJim
Experience is the BEST Teacher. Is that why it usually arrives in a shower of sparks, flash of light, loud bang, a cloud of smoke, AND -- a BILL to pay? You usually get it -- just after you need it.
awhile ago I made one using google sketchup when I was designing my box. I will look for it but it is in skp.
Edit: Found it, here is a picture. Let me know if you would like it.
Thanks For That -- Regnar - While I was away from the 'zone ) I made a rough one myself. (Maybe shoulda' kept my hands off the keyboard - until I gave it a shot?!) see attached
The external dimensions are pretty close - but I just needed representation for a box design too. How did your box turn out? Any pics of that?
Thanks again!
Experience is the BEST Teacher. Is that why it usually arrives in a shower of sparks, flash of light, loud bang, a cloud of smoke, AND -- a BILL to pay? You usually get it -- just after you need it.
No pictures because I haven't build the box. I am making a vertical pull out drawer that will be under the cnc router. I basically planned out where I needed to run wires and where to drill holes. I'm still working out a few things with the router design and should be looking at finishing it up in the next few months. I will post it here or you can watch my build @ Regnar's Build (Now with Video) I would be a lot further along than what I am at now but work and the heat outside take a lot of time away lately.
Thanks for that! saw your gallery of the rest of the build - I can keep checking there on the box -- yeah - the Heat. Thats how I had time yesterday to try out the CAD myself -- so much better inside than outside residing the south wall. Still gotta git-r-dun before hurricanes arrive here in FL.
Experience is the BEST Teacher. Is that why it usually arrives in a shower of sparks, flash of light, loud bang, a cloud of smoke, AND -- a BILL to pay? You usually get it -- just after you need it.
Where in Florida are you I am in Holiday which is about 30 minutes away from Tampa. Noticed that you where in aviation, I currently work on HH60's for the Coast Guard.
FWB Panhandle - Hurricane Alley. Former AF jet jockey now sailor - Keep Those Coast-ies Flying! They do great work - but I hope I never need 'em.
Experience is the BEST Teacher. Is that why it usually arrives in a shower of sparks, flash of light, loud bang, a cloud of smoke, AND -- a BILL to pay? You usually get it -- just after you need it.
Posting Permissions
| | |
