LED light on Xylotex Problem
I have a question of my Xylotex 4 axis board.
LED light on Xylotex is not coming up when power supply is connected. But cooling fan is working nomally and Vref is checked normally; I set all Vref to 3.312 for my motors(2.3 A). I have not connected motor to board since I don't know what the problem is. What is problem with my board? My board is destroyed? Please let me have any advice on this.
Have you emailed Xylotex about your problem?
Is your board connected to your PC?
I have not used my 3 axis board for some time now and if your board is similar to mine the led should light connected to the PC and PC is on without the power supply turned on.
Sorry I canít do more to help but emailing the manufacturer is your best bet.