See page 52 here http://www.xylotex.com/PacSciDS.pdf
Have been doing real well in setting up my console, but hit a snag connecting the Xylotex XS-3525/8S-1 board to the Stepper that came with the board. The stepper is a Powermax II, Mod: P21NSXCLSS-N-S-DS
The stepper has four leads, RED (1-2), BLACK (3-4), WHITE (5-6) AND GREEN (7-8) leads.
The drawing of the board is labeled " B#, B, A, A#". Cannot find how this relates to the connections on the stepper in the "Standard Pinout Information" for the board.
See attached drawing.
Mach3 2010 Screenset
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)