Connection Between Xylotex Board and Stepper Motor

[Mr.Chips]

Have been doing real well in setting up my console, but hit a snag connecting the Xylotex XS-3525/8S-1 board to the Stepper that came with the board. The stepper is a Powermax II, Mod: P21NSXCLSS-N-S-DS

The stepper has four leads, RED (1-2), BLACK (3-4), WHITE (5-6) AND GREEN (7-8) leads.

The drawing of the board is labeled " B#, B, A, A#". Cannot find how this relates to the connections on the stepper in the "Standard Pinout Information" for the board.

See attached drawing.

Thanks
Hager

[ger21]

See page 52 here http://www.xylotex.com/PacSciDS.pdf
Looks like:
5&6=A
1&2=A#
8&7=B
3&4=B#

[Mr.Chips]

Originally Posted by ger21 See page 52 here http://www.xylotex.com/PacSciDS.pdf Looks like: 5&6=A 1&2=A# 8&7=B 3&4=B#

Thanks
It shouldn't be this difficult.