Need Information about Xylotex new 495 oz/in.

[hugo carradini]

Hello friends.
I am planning to buy 3 new Xylotex 495 oz/in to put in my second CNC router and want to know you opinion because can’t fine much information.
Thanks
Hugo Carradini

[timmyb199]

well i dont know if it helps but i bought the package for my first build, i am building a plasma table/router. if u do i search i have a buildup of my box ect. , i have never used anything else so my opinion is probably not the best but my motors move and everything was easy to hook up and their support i thought was great. if u have any questions ask away and i will help you the besti can with what i know. i am learning so you might know more than me

timmyb

[CerveloRod]

Check the torque curves for them versus the 276oz/in. The 276's might be better suited. You first have to figure out how fast or slow you want to turn the steppers. the 276's are pretty impressive if you use 5tpi screws, I have ballscrews myself.

Rod