Help W/Wiring Pinouts on Nema23 269 oz.in. Kit

[InventorJohn]

Hi Folks, im new to the board, just starting out. Got a 3 axis Xylotex kit with the nema23 269oz motors. Going to be putt'n them onto a Sherline 5000 little tabletop mill.

I do not have a wiring diagram on the motors, and have been unable to find them online. The board is marked with Axis (ZA, ZA#, ZB, ZB# ECT.) and the moters have 4 wires out Black, Blue, Green, Red. I didn't want to hook anything up until I can find out which one is which

Thanks for any help,

-John

[Rodm1954]

Hi John
I have put together the same motors and driver a month ago and the detail given to me was

Red - B#
Blue - B
Black - A#
Green - A

Same sequence for each axis. This is how I wired mine up and it works fine.

[InventorJohn]

Perfect! I got it working! Now I have to figure how to do stuff with it

Thanks for your help!

-John