Newbie Building my own CNC

Results 1 to 2 of 2

Thread: Building my own CNC

  1. #1
    Registered
    Join Date
    Sep 2009
    Location
    Indonesia
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Building my own CNC

    Hi,
    Im a newbie here.
    I just bought a small 2x4 Torchmate CNC machine.
    And now I want to build a 4x8 CNC.
    So I hope you guys can help me & give me some suggestions about what kind of motor I should use.
    Well basically all about the electronics part I will be needing to build my own CNC machine.
    Thank you guys

    Similar Threads:


  2. #2
    Registered D.L's Avatar
    Join Date
    Jan 2009
    Location
    Australia
    Posts
    265
    Downloads
    1
    Uploads
    0

    Default

    Xylotex is a good driver, still got my old one laying around.
    As you grow into bigger hardware, it still comes in handy to have the smaller Nema drives for a 4th or 5th axis table or a tool carousel.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Building my own CNC

Building my own CNC