I burnt one of the axis. Can I still use the other three?

Results 1 to 8 of 8

Thread: I burnt one of the axis. Can I still use the other three?

  1. #1
    Registered
    Join Date
    Mar 2010
    Location
    Sweden
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default I burnt one of the axis. Can I still use the other three?

    Hi,

    While testing one of the axis I got the "pop" and "burnt" smell. I assume there is no chance that driver might still work.

    The board seems to be shorted at the moment, but it still has three other drivers.

    If I cut the pins on the burnt driver and remove it should the rest of the board function?

    I don't know much about electronics so bear with me.

    Thanks,
    Fernando

    Similar Threads:


  2. #2
    Member
    Join Date
    Dec 2005
    Location
    usa
    Posts
    258
    Downloads
    0
    Uploads
    0

    Default

    You shouldnt have to remove the IC, but yes you can use the others.

    If you would like to have it repaired let me know.

    Eric



  3. #3
    Registered
    Join Date
    Mar 2010
    Location
    Sweden
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by dbtoutfit View Post
    You shouldnt have to remove the IC, but yes you can use the others.

    If you would like to have it repaired let me know.

    Eric
    Hi dbtoutfit,

    Thanks for the reply. You mention that it shouldn't be necessary to remove the IC, but the board does seem to be shorted and causes the power supply to shut off.

    Is there an easier way to remove the short? Should the board work by just removing the IC?

    Thanks,
    Fernando



  4. #4
    Member
    Join Date
    Dec 2005
    Location
    usa
    Posts
    258
    Downloads
    0
    Uploads
    0

    Default

    sorry,

    You shouldnt have to.

    I will say I am little concerned you have more than just a pop ic since its knocking your psu off.

    I have had ic go bad on me but never caused the psu not to work.
    The bad ic maybe causing another problem so go ahead and remove it.


    Eric



  5. #5
    Registered
    Join Date
    Apr 2010
    Location
    USA
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Burnt axis

    Fernando,

    I recently fried a axis. Noticed that the ic was getting very hot and decided to remove it to see if board would power up. That worked for me.

    Stan



  6. #6
    Registered
    Join Date
    Apr 2005
    Location
    USA
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default

    Resurrecting this thread because the Z drive on my 3-axis Xylotex died last night. Pins A and A- are shorted to Vbb and Gnd. I believe just the Z axis IC is shot and shorting pins internally. Does anyone know of someone who will repair these boards, or a source for the IC and schematic? I have the skills to repair it myself but I need to find the parts.

    Would prefer to keep this board since I made the case and cables custom for it. Thanks for any help.



  7. #7
    Registered
    Join Date
    Jan 2006
    Location
    USA
    Posts
    2985
    Downloads
    0
    Uploads
    0

    Default

    An earlier post looked like an offer to repair the OPs drive. I'd guess he knows how to do it.

    Matt



  8. #8
    Member
    Join Date
    Dec 2005
    Location
    usa
    Posts
    258
    Downloads
    0
    Uploads
    0

    Default

    Jtheletter,

    Did you repair the board? I have a few New IC's in stock most the time.

    I'd be more than happy to take it off your hands if you no longer use it. lol
    I have had to replace many things on this board. Repairing the Buffer IC is by far the funniest. NOT. However when they go bad you generally don't have to replace it and can just use the other legs as 1 or 2 gates are not used.

    Eric


    Sent from my Samsung S3 on Tapatalk 2



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

I burnt one of the axis. Can I still use the other three?

I burnt one of the axis. Can I still use the other three?