| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Work Fixtures and Hold-Down Solutions Discussion Modular workholding, Hogout workholding, Automation workholding. Hydraulic workholding, Jigs and Assembly workholding here. |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
09-27-2005, 07:44 AM
| |||
| |||
We are looking into a pallet system for our Hermle C800 5-axis machine. Right now we are looking at a Schunk Unilock system. Has anyone used this, or any other pallet? If so, I would appreciate any feedback you could provide. Thanks Dan
__________________ (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)    |
|
#2
09-09-2006, 01:40 PM
| |||
| |||
I am biased when it comes to my suggestion, but our company was founded in response to the high costs and problems associated with systems like Schunk, Erowa and System 3R. Check out our Pallet Retention System at www.piersonworkholding.com |
|
#5
09-10-2006, 02:50 AM
| ||||
| ||||
| Carr Lane and Kurt have Pallet Tombstones as well. Like Mikes very expensive.
__________________ Toby D. "Imagination and Memory are but one thing, but for divers considerations have divers names" Schwarzwald (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) www.refractotech.com |
| Sponsored Links |
| |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
