50 taper tool setter - CNCzone.com-The Largest Machinist Community on the net!

utengineer04 · #1 09-12-2005, 09:52 AM

Hello, can anyone tell me who makes a good 50 taper tool setter (measurer)? And what other name brands are out there. Thanks, Brian

psychomill · #2 09-12-2005, 12:24 PM

In the machine or out of the machine? Mechanical, laser, optical...?

You could be as simple as a taper holder and a height stand (or a Jo block in the machine), or full blown digital/electronic.

Check Renshaw, Parlec, Lyndex/Nikken, Command, Carbaloy, SPI, etc, etc.

utengineer04 · #3 09-12-2005, 01:42 PM

Out of the machine, and optical. Something like in a tool rom, to measure the height and radius.

psychomill · #4 09-12-2005, 03:15 PM

Then, check out Lyndex/Nikken, Carboloy, and Parlec just to name a few.

psychomill · #5 09-12-2005, 03:16 PM

Then, check out Lyndex/Nikken,
Carboloy, and Parlec just to name a few.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)