| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Work Fixtures and Hold-Down Solutions Discussion Modular workholding, Hogout workholding, Automation workholding. Hydraulic workholding, Jigs and Assembly workholding here. |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
08-26-2005, 07:54 AM
| |||
| |||
Who makes a good 5C Collet ? I've wasted money on collets that were smaller than they should be and I end up with parts getting stuck. I've also have found that some collets have a thread relief on the O.D. so large that the key in my index head will find its way into this groove causing me much grief.    |
|
#2
08-26-2005, 08:37 AM
| |||
| |||
| Hardinge makes the best collets I have ever used in the past twenty years. We by them through DoAll company (DGI) run about 25-30 dollars. I two have run across the same promblems with the cheaper collots not opening or being to soft even. Good luck John |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
