Two Sided Milling Fixture

[Mihelich]

Does anyone have a nice fixture design for being able to mill one side of a part and then flip it about its center to mill the other side?
I tried a simple two pin dowel fixture cut on the CNC but it still was just slightly off center on the second side cut.
Just looking for a nice fixture idea for this issue.

Thanks,
Tom

[Trent Steel]

Use soft jaws on the vise, then machine them to match the shape of your part.

[cncjunky]

Use soft jaws on the vise, then machine them to match the shape of your part.

Thats a good idea, or you could cut out your part shape in a block of aluminum and drill it and tap it. You'd have to also put a hole in your part too.