Results 1 to 4 of 4

Thread: Hmc Pallet ?

  1. #1
    Registered
    Join Date
    Mar 2007
    Location
    usa
    Posts
    17
    Downloads
    0
    Uploads
    0

    Question Hmc Pallet ?

    Does Anyone Know Of A Place Other Than The Machine Builder. That Sells Pallets For Horizontal Machines? Or Possibaly A Way To Find Out What Pallets May Interchange.
    Such As A 500mm Plater From A Mori Interchanging With A 500mm Mazak Pallet.
    I Have A 500 Mm Pallet On My Machine It Is A Mazak Nexus 6000
    With A 500mm Pallet 19.68 X 19.68
    Thanks For Your Answer In Advance
    Ricky


  2. #2
    Registered
    Join Date
    Mar 2004
    Location
    Holly Springs, NC
    Posts
    7
    Downloads
    0
    Uploads
    0
    Ricky,
    If you are talking about the base that the tombstone sites on, I would believe that you could only get it from the supplier. If you are talking about the Tombstone itself, You can get them from many places. You can also get cluster towers of double lock vises.

    Scott


  3. #3
    Registered
    Join Date
    Dec 2006
    Location
    USA
    Posts
    92
    Downloads
    0
    Uploads
    0
    I have a couple of spare pallets for my H-500/50 I sell if that's what you need.


  4. #4
    Registered
    Join Date
    Mar 2007
    Location
    usa
    Posts
    17
    Downloads
    0
    Uploads
    0

    H500

    Please Send Pics If You Could.


Similar Threads

  1. Pallet systems
    By Dan B in forum Work Fixtures and Hold-Down Solutions
    Replies: 4
    Last Post: 09-10-2006, 02:50 AM
  2. Pallet Change
    By CNC Mendez in forum G-Code Programing
    Replies: 6
    Last Post: 07-25-2006, 01:50 PM
  3. Automated clamping on a 2 pallet VMC
    By Scott_bob in forum Fadal
    Replies: 8
    Last Post: 01-23-2006, 11:42 AM
  4. Automatic Pallet Changer
    By DDM in forum CNCzone Club House
    Replies: 4
    Last Post: 10-07-2004, 11:22 AM
  5. correct pallet check
    By kmuller in forum General Metal Working Machines
    Replies: 0
    Last Post: 01-14-2004, 04:54 PM

Posting Permissions


 


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed


Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.